A monitor arm lifts your screen off the desk using a 春季-loaded or gas-powered arm, giving you back valuable workspace and letting you adjust height, tilt, and rotation freely. This guide covers everything a first-time buyer needs to know.

Types of 螢幕 Arms

There are three main types. Clamp-mount arms grip the edge of your desk with a clamping mechanism. They require no drilling, making them ideal for rented apartments. Grommet-mount arms pass through a hole drilled in the desk for maximum stability. Wall-mount arms attach directly to the wall, leaving your desk completely clear.

Check Your 螢幕

Before buying, verify that your monitor has VESA mounting holes (usually 75mm x 75mm or 100mm x 100mm) on the back. Also confirm that the arm’s weight capacity exceeds your monitor’s weight by at least 50%.

Basic Installation Steps

Attach the clamp to the back edge of your desk and tighten it. Mount the VESA plate to the back of your monitor. Slide the monitor onto the arm until it clicks. Route cables along the arm and tidy them with the included clips. Adjust the height so the top of the screen is at or slightly below eye level.

Fine-Tuning

After installation, adjust the arm tension so the monitor stays where you put it. Set the distance to about an arm’s length (50-70 cm). Tilt the screen slightly upward to reduce neck strain.

A monitor arm is one of the most effective upgrades you can make to your desk. With proper installation, it will serve you well for years.